RSS FeedElectric Skateboard
Retail skateboards were first
marketed in 1958 by Bill and Mark Richards of Dana Point, California. They attached roller skate wheels from
the Chicago Roller Skate Company to a plank of wood and sold them in their Val
Surf Shops.
Finding a nice play to skate is very hard these
days, especially with some parks always full of children who are just trying to
the same thing. At the same time, some parks do not have the adequate space or
are just too crowded to accommodate skateboard ramps. To avoid these problems,
one of the best solutions is to create your very own skateboard ramps either at
home or in any backyard. To make this possible, follow this simple guide on how
to design and build a stable skateboard ramp.
After everything is in the right position, it is
now time to nail the pieces together permanently. From the remaining plywood,
cut a smaller piece and then contour it using an electric plane, following the
angle to create the pointed part of the skateboard ramp. Use a glue to hold the
piece in place and then use a nail to keep the pieces intact while the glue
dries off. Place the plywood on top of the frame, making sure that it is
aligned with the top and both sides of the frame.
The skateboard has evolved since the first mass produced models in the
1960s. Boards in the past were often made in the shape of a surfboard, with no
concavity and constructed of solid wood, plastic, even metal. The wheels were
usually made of a clay composite, or steel and the trucks (axles) were less
sturdy and initially of a 'single-action' design compared to today's
'double-action'.
If you like, you may even build yourself a ramp.
The things you will need for the purpose will depend on the nature of the ramp
you want. If you want a slider box or a jump ramp, an empty parking lot or your
driveway will be enough. If want your ramp bigger and unmovable, then you will
certainly need more space. It is wise to build your ramps on a flat or level
surface. Otherwise, it will be difficult to build and ride the ramp.
Recourse box: http://www.elektroskate.co.uk